|
Ted, a friend of mine out in Kentucky (eastern, I'm not sure where) keeps dendrobates. He was telling me today that you get a table top drill press from Sears, and some sort of diamond cutting bit. he suggested marking the hole you want to cut, and then build a deep ring of modeling clay around the area where you want drilled. Then, you fill the ring with just a little bit of cold water and an ice cube or two. Then you let the weight of the drill press do the drilling. The trick is to keep the bit cold and wet. It didn't sound like you needed all that big of a hole. He's a member here but doesn't post much as there aren't many frog enthusiasts here. I'll tell him about this thread so he can give you some more info.
Bry
|
