|
Hi Bry,
I would just measure the length of the branch you are going to use and see how it would fit in your cage.
Then when you no where you want it just mark the inside of the cage and drill the holes for the threaded screws.
If the cage is to small to get a drill In side of it just transfer your measurements to the out side of the cage.
I sell my arboreal cage for $349.00 + shipping. That is for the clear or white one.
It comes with one plastic tub, one heat mat with a rheostat, vents and one wood branch.
It measures. 23 1/4" long X 24 3/4" high X 16 3/4"deep. If you would like one just e-mail me.
Take care,
Tom
|
